Harmonics Seminar September 16, 2016

Harmonics Seminar Added to September Schedule $229

This eight hour seminar explains harmonic distortion and its causes, identifies problems associated with harmonics and practical limits for harmonic distortion. The seminar teaches methods to identify, reduce and to avoid harmonics problems and how to predict estimated levels of harmonic distortion.  Learn More.

Power Quality Seminars Geared Towards:    

Harmonics Seminars

• Engineers


• Architects


• Facility Managers


• Motors / Drives Industry


• OEMs


• Systems Integrators


• Industrial Electricians


• Electrical Design Firms


• Grid Inter-tie Engineers


• Maintenance Engineers


• More…

Please Join us at the below seminars which are approved by the State of Wisconsin DSPS and approved for Credit Hours for these credential types:
Commercial Electrical Inspector Certification, Industrial Journeyman Electrician License, Journeyman Electrician License, Master Electrician License

Harmonics Seminar September 16, 2016

Power Factor Seminar held on August 19, 2016.

Power Factor Seminar held on August 19, 2016.

This four hour power factor correction seminar explains the three types of power factor, from a cause and effect basis and then teaches the intricacies of each type along with the methods to improve each power factor. The seminar demonstrates how to size power factor capacitors for various types of situations and the pitfalls to be avoided.  Several real life examples are worked as a group to demonstrate the techniques used to perform analysis of power factor, size power factor equipment and to quantify the expected results and ROI. See the outline and learn more about

Power Factor Seminar

each subject below:         Buy Tickets on Eventbrite

Introduction to Power Factor
Definition of power factor

Benefits of high power factor

Problems with low power factor

Types of Power Factor

Fundamental Frequency (Displacement) Power Factor

Motor currents and PF

Typical PF by industry

Lagging (inductive) current

Leading (capacitive) current

How much capacitance to add

Harmonic resonance

Detuning capacitors to avoid resonance

Capacitor boosting (Voltage, kVAR, current)

Local vs. Centralized capacitors

Fixed vs. automatic PF capacitor systems

Capacitor switching device ratings

Cost of low power factor

Distortion Power Factor

Estimating distortion PF based on harmonic current distortion

Causes of low distortion power factor (harmonic distortion)

Typical current distortion by equipment

What does harmonic current distortion look like?

Improving distortion PF

Total (true rms) Power Factor

Function of both displacement and distortion PF

Best practices

Decisions to be made about total PF

Power Quality Seminars Geared Towards:    

• Engineers


• Architects


• Facility Managers


• OEMs


• Systems Integrators


• Industrial Electricians


• Electrical Design Firms


• Grid Inter-tie Engineers


• Maintenance Engineers


• More…

Please Join us at the below seminars which are approved by the State of Wisconsin DSPS and approved for Credit Hours for these credential types:
Commercial Electrical Inspector Certification, Industrial Journeyman Electrician License, Journeyman Electrician License, Master Electrician License

Friday, Aug 19, 2016

Power Factor Seminar PQ-(102) DSPS 17409

 4 Credit Hours State of WI CEUs DSPS

When: Friday, Aug 19, 2016

Where: W67 N222 Evergreen Blvd., Suite 209, Cedarburg, WI 53012 

Description: Power Factor Seminar

Please visit our Electrical Industry Trade Show and Seminar Schedule page.

Visit our Power Quality Seminar & Training Page for more information.

Power Factor Seminar held on August 19, 2016.

FRAKO Triple Safety Technology Extends the Life of Capacitors

FRAKO combines segmented film with self healing and over pressure disconnecting to offer Triple Safety protection against high energy voltage transients that can be damaging to typical capacitors. The primary objective of FRAKO’s exclusive triple safety feature is safety, but the result is also longer capacitor life.

Segmented film construction offers the highest degree of protection available against high energy internal short circuits caused by self healing events in the capacitor windings. Segmented film can safely remove a damaged section of film to protect against capacitor bursting.

FRAKO’s Dry-type capacitors eliminate the concerns of leakage and flammability associated with oil-filled capacitors, and offer enhanced protection beyond the capabilities of self-healing film alone, against severe over-voltage transients.

FRAKO Capacitors have unique features that offer superior performance and long life:

1. Withstands harmonic current and handles maximum continuous current up to 2.25 times rated current.
2. Self-healing film protects against typical over-voltage.
3. Segmented film technology removes small damaged segments but retains overall capacitor integrity.
4. Patented overpressure disconnector system completely removes all three phases of the capacitor from the electrical circuit at end of life or under severe overload.
5. FRAKO capacitors withstand harmonics and high ambient temperatures (up to 68°C) together without derating.

Self-healing segmented capacitor film

The principle of the over 

pressure disconnector

FRAKO is committed to the highest quality standards and performs 100% capacitor testing to assure performance, quality and safety.

Power Quality Training

For

Electrical Professionals

June 24, 25, 26, 2014

This 3-day learning event offers a combination of classroom style seminars with live demonstrations plus hands on opportunities.  This seminar, offered by Allied Industrial Marketing, Inc., will be held at the Eaton Power Systems Experience Center, near Pittsburgh, PA, which is a one-of-a-kind electrical system power quality demonstration facility.  Participants will gain a broad knowledge of power quality.

Learn, Explore & Experience PQ Problems & Solutions

Classroom Style Theory, Demonstration & Hands-on Lab

Only 24 seats available!

Don't miss this one-of-a-kind learning experience with demonstrations and a hands-on Lab!

PQ Measurements, Analysis and Problem Diagnosis

Two days of classroom style theory, applications and demonstrations are followed by a full day of training with hands-on laboratory sessions with a focus on making power quality measurements, analyzing the data and diagnosing probable causes of power quality problems. The participants will have the opportunity to use Fluke 435 Power Quality Analyzers and will learn how to make power quality measurements as well as to interpret the data.  This session teaches what to look for, where to measure and how to interpret the waveforms.  Attendees will learn how to quickly recognize specific power quality disturbances by the voltage and current waveforms.

  Power Factor 

  Harmonic Distortion

  PWM Voltage Issues

  Practical Solutions

  Real Life Examples

  More...

  3-day training program $599

   Register online

CSA approval is essential when using capacitors in Canada

Having CSA approval is essential when using capacitors in Canada which shows that a product has been independently tested and certified to meet recognized standards for safety or performance.  Frako’s commitment to provide high quality capacitors to the North American Market has driven them to obtain CSA certification in addition to UL and IEC.  

FRAKO LKT Series capacitors are now certified by Canadian Standards Association (CSA file # MC 256833).  Along with CSA approval they are also UL recognized components (cURus File # 337088) and comply with IEC (IEC 831-1, -2 / EN 60831-1,-2).  The LKT Series meets or exceeds all known industry standards and surpasses the requirements of UL, CSA and EN/IEC.                                                                                                      

Capacitor ratings include 208 – 800VAC, 1 – 30 kvar of rated reactive power.   Capacitors offer high current capability to handle continuous current as high as up to 2.7 times nominal capacitor current.  FRAKO capacitors are suitable for use in continuous ambient temperatures of -40°C up to +68° C and continuous maximum case temperature of 75°C along with maximum altitude of 4000 meters.

Total Power Factor by John Houdek

Total Power Factor Tutorial 

What’s new in Power Quality? Not the Goal! PQM-109

The goal of quality power for your facility or application is probably still the same:

·    Supply equipment with power that does not cause malfunction or damage

·    Eliminate penalties from provider or save energy costs

·    Comply with industry standards

 

Peace of Mind

What is new in power quality is the ability to model the solution before it is installed to prove the effectiveness of the solution giving you peace of mind.  This can be done at the power electronic level which is the most precise.   

Achieving the goal is sometimes difficult.  You may be faced with a decision between multiple solutions offered by well meaning manufacturers.  Which solution will truly solve your problem or meet your needs?

Now, your system can be modeled at the actual power electronic level to predict the performance of your myriad of possible solutions.  Using circuit simulation with a comprehensive power quality analysis can save you from making an expensive mistake by evaluating various alternative solutions before you buy them.  Like a test drive before you buy it… this can give you peace of mind.